Pool Leak Guide

Leak or Evaporation? How to Tell the Difference

Home » TIPS » TIPS: Guide to Pool Leaks

Contact Us

Pool Water Levels: When to Worry, When to Relax

Owning a swimming pool can be a pleasure, but it can also be a pain! One of the most common issues we encounter is pool owners noticing a drop in their pool’s water level. Is it simply evaporation or a more serious issue like a leak? Knowing the difference can save you time, piece of mind and avoid potential, costly damage.

Why is My Pool Losing Water

First, it’s essential to distinguish between water loss due to natural evaporation and a leak. Evaporation is a common phenomenon, influenced by factors such as wind speed, temperature, humidity, and the pool’s surface area. In South Florida’s hot and humid climate, pool evaporation rates are typically higher than in many other parts of the country due to the warm temperatures, high humidity, and intense sunshine.

While evaporation rates can vary, pools in South Florida often experience water loss of about 1/4 to 1/2 inch per day, or roughly 1.5 to 3.0 inches per week, due to evaporation alone. This rate can increase significantly in conditions of hot, dry, and windy weather. The specific evaporation rate for a pool can be influenced by factors such as the time of year (higher in summer, lower in winter), pool location (exposed vs. sheltered), wind conditions, use of pool covers, and pool water temperature.

Estimated Weekly Pool Evaporation Rates in South Florida

Season	Est. Weekly Water Loss (in.)
Summer	1.5 – 3.0 in.
Spring	1.35 – 2.7 in.
Fall	1.2 – 2.4 in.
Winter	0.75 – 1.5 in.

Another important factor to consider is whether you’re running a pool heater. We’re maybe stating the obvious here but heated pools experience higher evaporation rates than unheated pools. This is because warmer water evaporates more quickly than cooler water. If you’re using a pool heater, you can expect to see an increase in water loss due to evaporation, which may be as much as 50% higher than an unheated pool! This additional water loss is normal but should be factored in when assessing whether your pool might have a leak.

Additional potential indicators of a pool leak include the following:

Unusually wet areas around the pool.
Loss of more than 3.5 inches of water per week (which well exceeds typical evaporation rates in South Florida summer).
Visible cracks or tears in the pool liner.

By understanding the expected evaporation rates for your region and regularly monitoring your pool’s water level, you can more easily identify when water loss might be due to a leak rather than natural evaporation.

DIY Leak Detection: Pool Leak Testing You Can Do Yourself

If you suspect a leak, further investigation is critical to avoiding potential costly damage to your pool or its equipment. Here are a couple of DIY techniques to help locate the leak before calling a pool service professional:

The Bucket Test: The most common and easy test to help determine whether the decrease in water level is due to evaporation or a leak. And again, while evaporation rates can vary greatly, pools in South Florida can expect water loss of about 1/4 to 1/2 inch per day.
- Place a bucket of water beside the pool or on the first step of your pool.
- Mark the water levels on both the bucket and the pool.
- Turn your pump off.
- Wait at least 24 hours, and then compare the two water levels.
- If both levels have dropped similarly, evaporation is the culprit. However, if the pool’s water level has decreased more than the bucket’s, it’s probable you have a leak.
Bucket Test Part 2: Conduct the bucket test again, but this time with the pump on. If the water level in the pool drops significantly more than in the stationary test, it suggests a potential leak in the plumbing or filter system.
Ink Test: This method helps pinpoint the exact location of the leak (see our section below about the most common areas to check). In calm water, apply a small amount of dye near the suspected leak area. If there’s a leak, the dye will flow towards it, revealing the exact location.

Common Areas to Identify Swimming Pool Leaks in South Florida

Understanding the usual suspects can expedite fixing leaks in your South Florida pool. The region’s unique climate and environmental factors can contribute to specific types of pool damage, so knowing where to look is crucial:

Skimmers and Plumbing Lines: Check where skimmers connect to pool walls for cracks or separations. Inspect associated underground plumbing, paying attention to areas with unusually damp soil. Leaks here are common due to constant water flow and potential ground shifts.
Equipment Pad Plumbing: Examine above-ground pipes, joints, and valves on the equipment pad. Look for visible leaks, cracks, or signs of corrosion. Pay special attention to pump seals and filter connections, as these are frequent trouble spots.
Pool Lights, Drains, and Return Jets: Inspect the seals and surrounding areas of these fixtures. If the water level stops dropping at or near these points, you’ve likely identified the leak source. Consider using dye testing for precise leak location.
Cracks in Pool Structure or Liner: For concrete pools, look for cracks, especially in previously repaired areas. In vinyl liners, check for tears or separations, particularly around fittings, corners, and steps. Even small cracks can lead to significant water loss over time.
Tile Line: Examine waterline tiles for cracks, looseness, or missing grout. Pay attention to areas where tiles meet different materials, as these junctions are prone to leaks

Remember, South Florida’s unique combination of heat, humidity, and occasional severe weather can accelerate wear and tear on pool components. Regular inspections and maintenance are key to catching leaks early and preserving your pool’s integrity in this challenging climate.

Fixing Common Pool Leaks: DIY and Professional Solutions

Once you’ve identified the source of your pool leak, you can consider the following fixes. Remember, while some repairs can be done by homeowners, others require professional expertise to ensure safety and effectiveness. At Alligator Pools, we can help you with our leak detection and repair service.

Skimmers and Plumbing Lines:
- DIY: Replace worn skimmer baskets and apply pool putty around skimmer openings for minor leaks.
- Professional: Repair or replace damaged skimmer units, fix underground plumbing leaks.
Equipment Pad Plumbing:
- DIY: Tighten loose fittings, replace small sections of damaged pipe.
- Professional: Repair major pipe breaks, replace faulty valves or pumps, redesign plumbing layout if needed.
Pool Lights, Drains, and Return Jets:
- DIY: Replace worn gaskets or apply pool putty for minor sealing issues.
- Professional: Repair or replace light housings, fix conduit leaks, reseal drains or jets.
Cracks in Pool Structure or Liner:
- DIY: Apply epoxy patches to small cracks in concrete pools, use vinyl patch kits for minor liner tears.
- Professional: Structural crack repair, major resurfacing, full liner replacement.
Pool Deck and Coping:
- DIY: Fill small cracks with flexible sealant.
- Professional: Repair significant deck cracks, replace or reset loose coping stones.
Tile Line:
- DIY: Reapply grout to loose tiles, seal small cracks.
- Professional: Replace damaged tiles, repair underlying structural issues.

While DIY solutions can address minor issues, it’s crucial to know your limits. Improper repairs can lead to more severe problems. When in doubt, or for any repairs involving your pool’s structure or electrical components, always consult a professional pool service. They have the expertise and equipment to diagnose and fix complex issues safely and effectively.

Preventing Pool Leaks: Proactive Strategies for Pool Owners

Preventing leaks is often easier and more cost-effective than repairing them. Here are some key strategies to help maintain your pool’s integrity:

Regular Maintenance: Implement a consistent maintenance schedule to keep your pool in top condition. This includes cleaning, balancing water chemistry, and inspecting equipment regularly.
Early Detection: Conduct routine checks for signs of leaks. Monitor water levels, inspect visible plumbing, and be alert to unusual changes in your pool or surrounding area.
Professional Inspections: Schedule annual professional inspections to catch potential issues before they become major problems. Experts can spot early warning signs that might be missed by untrained eyes.
Careful Chemical Management: Maintain proper water chemistry to prevent corrosion and degradation of pool surfaces and equipment, which can lead to leaks over time.
Prompt Repairs: Address minor issues promptly to prevent them from escalating into major leaks. This includes replacing worn gaskets, fixing small cracks, and updating aging equipment.
Pool Cover Use: Utilize a pool cover when the pool is not in use to reduce stress on the pool structure and equipment, potentially extending their lifespan.

By implementing these preventive strategies, pool owners can significantly reduce the risk of leaks, extend the life of their pool, and minimize costly repairs. Remember, a proactive approach to pool care is the best defense against leaks and other pool-related issues.

At Alligator Pools, we know how to tackle all kinds of repair issues. If you notice your pool losing water faster than usual, or if you see any cracks or gaps around your skimmer, don’t wait to get it checked out. Give us a call, and we’ll make sure your pool stays full!

Frequently Asked Questions

How much water should a pool lose a day?

In cities like Miami, FL it’s normal for a pool to lose about 1/4 to 1/2 inch of water per day due to evaporation. This translates to roughly 1.5 to 3.0 inches per week. However, this can vary based on factors such as:

Season (higher in summer, lower in winter)
Weather conditions (wind, humidity, temperature)
Pool location (exposed vs. sheltered)
Use of pool covers
Whether a pool heater is in use

Remember, heated pools can experience up to 50% more water loss due to increased evaporation.

How do I know if it's a leak or evaporation?

Perform the “bucket test”:
- Fill a bucket with pool water and place it on the pool steps.
- Mark the water levels in both the bucket and pool.
- After 24 hours, compare the levels. If the pool level has dropped significantly more than the bucket, you likely have a leak.
Monitor weekly water loss:
- If you’re losing more than 3.5 inches per week, it’s likely more than just evaporation.
Look for other signs of a leak:
- Unusually wet areas around the pool
- Visible cracks or tears in the pool liner
- Equipment running longer than usual

How often should you add water to a pool?

The frequency of adding water to your pool depends on several factors:

Natural evaporation rates (which vary by season)
Pool usage (splashing, people getting in and out)
Weather conditions
Presence of leaks

As a general guideline:

In summer: You might need to add water weekly or even more frequently.
In cooler seasons: Less often, perhaps every 2-3 weeks.

The key is to maintain the water level at about midway up the skimmer opening. This ensures proper circulation and filtration. Regular monitoring is crucial – make it a habit to check your pool’s water level at least once a week.